Northwest Aluminum Specialties Europe - Ninaberlaan 83 7447AC Hellendoorn The Netherlands - Tel: +31-548-659026 - Fax: +31-548-659010

Leistungen

Take Me To:
 

Typical Alloys Cast @ Northwest Aluminum Specialties Inc.

Many other alloys may be available upon request

 

1100

 
2014
2024
2618
2824
3003
3004
4032
4043
6005

 

6060

 
6061
6063
6351
6069
6082
7050
7075
9320
Others

Back To Top Of Page
Cast Diameter Tooling
Common Name

Standard (inches)

Nominal For 6061 Alloys

Tolerance +/- .025"

Note: Diameters can vary by alloy

Metric (mm)

Nominal For 6061 Alloys

Tolerance +/- .635
2.9"
2.902
73.710
3.2"
3.223
81.864
3.5"
3.508
89.103
3.6"
3.609
91.668
3.8"
3.817
96.952
3.9"
3.919
99.543
4.1"
4.098
104.089
4.3"
4.331
110.007
4.5"
4.477
113.716
5.2"
5.172
131.369
6"
6.018
152.857
7"
6.909
175.488
7.2"
7.251
184.175
8"
7.977
202.615
9"
8.971

227.863
10"
10.014
254.356
11"
As Per Tooling Mfg. Specification
na

Back To Top Of Page
Diameter Tolerance (inches & mm)
All Diameters As-cast- +/- .020" (.508 mm)
Machined - +/- .005" (.127 mm)
Cut Weight Tolerances (lbs) For Slugs Or Pucks Only

Use This Formula To Calculate The Tolerance

3.1416* (Diameter Radius* Diameter Radius) * Alloy Density * .010"

 Alloy Density
1100 = .098
2014 = .101
2618 = .100
3003 = .099
4032 = .097
6061 = .098
6063 = .097
7075 = .101
6069 = ..098
Cut Length Tolerance (inches & mm)

+/- .125" up to 48" Length

+/- 3.175 mm up to 1219.2 mm length

+/- .25" From 48" up to 70" Length

+/- .6.35 mm From 1219.2 mm up to 1778 mm Length

+/- .50" over 70" Length

+/- 12.7 mm over 1778 mm Length
Straightness (bow) (inches & mm)

.0625" Maximum per ft. of length

1.587 mm Maximum per every 304.8 mm of length

.50 max. lengths from 96" to 144"

12.7 mm max. lengths from 2438.4 mm to 3657.6 mm

.75" Max. in lengths over 144"

19.05 mm Max. in lengths over 3657.6 mm
Squareness Tolerance (inches & mm)

.090" for diameters up to 5"

2.286 mm for diameters up to 127 mm

.105" for diameters from 5" to 6"

2.667 mm for diameters from 127 mm to 152.4 mm

.125" for diameters from 6" to 7"

3.175 mm for diameters from 152.4 mm to 177.8 mm

.140" for diameters 7" to 8"

3.556 mm for diameters from 177.8 mm to 203.2 mm

.160" for diameters from 8" up 9"

4.064 mm for diameters from 203.2 to 228.6 mm

.175" for diameters from 9" to 10"

4.445 mm for diameters from 228.6 to 254 mm

.190" for diameters from 10" to 11"

4.826 mm for diameters from 254 to 279.4 mm

    
Bar Turning Capabilities (inches & mm)

Minimum Diameter - 2" (50.8 mm)**
Maximum Diameter - 5.025" (127.64 mm)

Please Note: Most bar turned diameters between 5.025" & 2.9"can be met
Please make an inquiry for diameters less than 2.9"
Hydrogen Gas Levels (Typical)
NWA = <.250 ml/100 gm (typical is <.200 ml/100 gm)
NWAS = <.250 ml/100 gm (typical is <.150 ml/100 gm)
Brinell Hardness (Typical) (In A Homogenous State) (Brinell Method = 2.23mm ball @ 10/500)
Sample
3 Days
1 Month
3 Month
6 Month
1060H - 8"
19.3
19.3
19.3
19.3
1100-O - 3.2"
27.2
27.2
27.2
27.2
1435H - 6" 21.8 23.3 23.3 23.3
2014-O - 6" 77 80 80 80
2014H1 - 6" 77 80 80 80
2024H - 2.4" 54 67 74 74
2024H - 4.1" 61 72 74 74
2024H1 - 6" 72 74 74 74
2024H2 - 6" 65 74 74 74
2618-O - 4.1" 96 109 109 109
3003-O - 4.1" 29.7 29.7 29.7 29.7
3003-O - 2.9" 30.4 31.2 31.2 31.2
3003H - 3.5 29.7 29.7 29.7 29.7
3003H1 - 9" 29.7 29.7 29.7 29.7
357.O - 3.2" 65 70 70 74
4032-O - 3.5" 55 55 55 55
4043H - 6" 36 36 36 36
5052-O - 6" 45 61 61 63
5056H - 6" 61 61 61 61
6005HA - 9" 35 38 38 38
6060H - 3.5" 35 38 38 40
6060HA - 8" 35.6 36 36 38
6060HL - 6" 37 43 43 45
6061H - 7" 40 43 45 45
6061H1 - 2.4" 40 48 48 48
6061H1 - 7" 39 40 41 41
6061H2 - 8" 43 43 43 43
6061HA - 8" 36 38 38 38
6061KD - 6" 43 43 45 45
6061-O - 2.4" 32 32.6 32.6 32.6
6061-O2 - 5.2" 40 43 45 45
6061-O3 - 4.3" 31.2 31.2 31.2 32.6
6061-O9 - 8" 4. 46 46 48
6063H3 - 6" 36 40 43 44
6063H5 - 6" 35 40 44 45
6063H6 - 6" 38 43 43 45
6063H9 - 8" 34.5 38 40 43
6063HA - 8" 33.6 41 43 45
6063HB - 6" 36 40 43 45
6063HC - 7" 33.6 38 39 40
6063HD - 8" 32.5 40 40 41
6063HF - 6" 32.6 40 41 41
6063HH - 6" 32 40 40 43
6063HJ - 7" 31.2 36 36 36
6063HK - 6" 33.6 40 43 43
6063HL - 6" 34.5 38 38 39
6063HN - 7" 31.2 38 38 38
6063HP - 7" 32.6 38 39 39
6063HR - 8" 34.5 34.5 34.5 34.5
6063HU - 7" 34.5 41 43 43
6066H - 8" 50 54 54 54
6069A - 2.4" 41 41 45 45
6069-O - 4.5" 43 43 43 43
6082-O2 - 4.1" 43 43 45  
6105H - 7" 50 54 54 54
6105H1 - 7" 46 50 50 54
6351H - 7" 40 40 40 40
6463H - 7" 34.5 38 41 41
7075H - 3.5" 61 61 61 61
7075H1 - 6" 70 70 86 86
7075H1 - 6" 65 74 80 80
7075-O - 2.4" 55 57    
7075-O2 - 7.2" 57 63 65 70
9320H - 6" 48 50 50  
A6000H - 9" 35 35 36 36
A6000-O - 4.3 31.2 32.6 32.6 32.6
DF53 - 2.9" 70 86 86 86
SC70H - 9" 86 93 109 109
Sonic Unit Capabilities
  • All material is 100% Ultrasonically tested as per DOT-3AL, PARA 178.46-5e
  • Two probes are used. One probe makes contact with the billet on the bottom and the other makes contact at the side, 90 degrees from the first probe.
  • Each probe has its own sonic unit with a readout screen.
  • The X scale on the readout represents distance starting at the entry surface, represented by 0. The back reflection occurs at the distance equal to the thickness of the billet.
  • The Y scale represents the amplitude of the defect detected.
  • The reject zone is set up to stop the unit anytime a reject is detected with an amplitude exceeding a 5/64" diameter axial hole and at a location that is approximately within the center 60% of the scanning distance.

 

Links

Tools

Kontakt